We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Hydraulic pressure:0.1-0.4 Mpa
Description Installation instructions 1. before installation, please choose close to water source, power supply, and have good drainage and easy maintenance place. 2. place the on a stable operating table, and the socket must have a good grounding system. 3. the is equipped with pure water and tap water selection switch, if necessary, the back plate can be opened, according to the actual use of water source adjustment. 4.the must do the water first and then electrify. 5. when using steam and boiling water, please don't put your hand under the sprinkler head and touch the metal part, so as not to be scalded. 6. use steam and boiling water, first adjust the direction of the nozzle, rotate slowly to the right, can evenly out steam and boiling water, turn left turn off. Safety tips 1. the tap water contains calcium and magnesium ions, which is easy to produce scale under high temperature, and the steam engine can reach up to 140 degrees. 2.The default safety pressure of the steam engine is kept at about 1 bar. If it exceeds 2 bar or more, please release the pressure after shutdown to check, at this time, don't force the to start. 3. when the pressure gauge shows the pressure, don't open the sewage outlet. First, the pressure will be emptied until the sewage can be discharged. Work display guidelines 1. turn on the power switch, display the light, which means the power is connected. 2. the light of the drinking water indicates that the boiled water can be used. 3. the heating lamp indicates that it is heating. 4. the water inlet light is indicating that the water is being added. 5. the pressure indicator lamp reaches 1.0bar, which means the steam pressure is completed. Inspection method for safety valve of steam engine Notice: the safety valve is installed on the top of the , there is a ring on the top of the valve, and there are three small holes in the middle of the full copper fittings. Attention: do not adjust the two nuts at the pull ring when the safety valve is checked, otherwise it will not play a role of safety protection. 1. pull the ring directly with the long handle auxiliary tool to pull up. Under normal circumstances, the three vents have steam discharge, slight exhaust sound, and immediately closed after release. 2. visual safety valve surface whether there is scale or leak, such as larger leakage must be replaced. 3. during the inspection, it is found that the upward pull pull ring can not be reused without steam discharge and must be replaced. 4. during the inspection, it is found that the pull ring is not allowed to be reused and must be replaced. 5. during the inspection process, three vents were found to be blocked and cleaned up in time. Item included:220V Stainless steel commercial steam boiling water frothing (153046)